High-quality and professionally executed installation enables the entrance door to ensure uninterrupted functioning and excellent sound and thermal insulation for decades.

The company Eutherm offers you a complete and professional service of installing new entrance doors.

The procedure begins with a measurement in the facility performed by one of our qualified experts. He will recommend the most suitable method of assembly and install the finished door.

After production, the door assembly phase follows. During assembly, we follow the instructions of the Institute of Construction, Ljubljana, and RAL guidelines.

There are several types of installation that differ with regard to the condition of the building, that is, the criteria that the installation must meet (eg new construction, renovation, desire for greater insulation or a higher level of security, etc.).

Only professional installation ensures flawless functioning of the door, which is why we advise you to leave it to experienced experts.

Eutherm’s installation service includes the following services:

measurement and advice on the most suitable method of installation by an experienced fitter,
removal of old doors,
installation of new doors and
repair of damage to internal walls.

Renovation can be done with skirting boards, masonry work or plaster coverings.

When removing an old door, there is usually minor damage to the inner frame. Experienced installers will do their best to ensure that the exterior facade is not damaged when replacing the door.

CLASSIC ASSEMBLY

You can choose a classic door assembly where the opening between the door frame and the wall is filled with polyurethane foam or other insulating material and the door frame is attached with anchors and screws.

ASSEMBLY ACCORDING TO RAL GUIDELINES

Due to energy efficiency, installation according to RAL guidelines is highly recommended, which is chosen by more and more clients.

In the case of energy-efficient installation or installation according to RAL guidelines, the installation system is applied by sealing the joint between the window and the object on three levels – internal, central and external.

Due to the application of the principle “as strong on the inside as on the outside”, the following must apply:

internal joint (located at the entrance to the opening; frame and plaster joint) air-tight and vapor-tight;
the central part, that is, the middle layer (in the opening) must be thermally insulated and sealed as well as possible;
the external connection (exit from the opening) must be waterproof and vapor-permeable to prevent the penetration of rain and wind.